After a day of diving, all I want is a shower, food and sleep. The camera has its own routine: rinse it in fresh water, charge the battery, back up the photos. With the Z8 in its underwater housing, only one of those last two works. The housing passes exactly one USB port to the outside, and the charging cable is plugged into it. That leaves Wi-Fi for the photos.
So my Z8 sends its photos via FTP straight to the laptop, with no router, no Nikon software and without opening the housing. First the workflow, then the technical details behind it.
Why the housing stays closed
The Z8 itself has two USB-C ports, but the Ikelite housing only passes one of them through. To get to the memory card, I would have to open the housing.
That is exactly what I want to avoid between two days of diving. A single hair on the O-ring is enough to let water in, and every time the housing is opened, humid air gets inside. Mostly, though, it is a feeling: the housing was watertight today. If I leave it closed, it will still be watertight tomorrow.
What wasn’t practical
The Z8 can send photos over Wi-Fi. Apart from Nikon’s own tool, every option relies on FTP. The only open question was who receives on the other end.
- Nikon Wireless Transmitter Utility: it started, but simply would not transfer anything.
- Camera as access point: in this mode the Z8 only offered 2.4 GHz. That is a fraction of the speed of 5 GHz.
- Camera on the hotel Wi-Fi: the camera has to know every network in advance. Setting up a new hotel network through the camera menu with the housing closed is just painful. You don’t do that once. You never do it. And if the network has a login page, you are out anyway.
- Windows hotspot set up by hand: that was my first solution, and already much better than typing every hotel network into the camera inside the housing. In daily use it failed on details, more on that below.
How the tool came about
When in doubt, ask Claude. Claude wrote most of the code, in conversation with me. I brought the problem, the decisions and the testing in real use, including every Err.1F message. The README says so too.
By the way, the versions are named after large sea creatures. The current v1.0.0 is called “Manta”, 1.x are rays, 2.x will be sharks, 3.x whales.
How it works: the laptop becomes hotspot and FTP server
FTP (File Transfer Protocol) is an old, open standard for copying files from one device to another. The Z8 supports it out of the box: it logs in to an FTP server and drops its photos there. Only two things are missing, a server and a network in which camera and server can find each other. My program on the laptop provides both.
- Start the program. It disconnects the internal Wi-Fi card from other networks and opens its own 5 GHz hotspot on it.
- Create an FTP profile in the camera once. The dashboard shows what goes into which field.
- Start the upload in the camera. Every photo is checked before it lands in the photo folder. Duplicates are detected, and interrupted files are replaced on the next attempt.
- Quit the program. Wi-Fi settings and power settings are restored. While it runs, it keeps the laptop awake, even with the lid closed if you want.
If you want the laptop to stay online, plug in a second Wi-Fi adapter, any 5 GHz USB stick. The photos travel over the internal card, the stick stays connected to the hotel Wi-Fi on the side.
Before the upload, I tell it what to expect today, for example the last image number. The dashboard then shows progress and time remaining, and at the end it lists exactly which numbers are still missing.
How fast it is
With a free 5 GHz channel, the Z8 manages about 14 MB/s. A 64 MB NEF reaches the laptop in roughly five seconds.
| Connection | Measured | 200 NEFs at 64 MB |
|---|---|---|
| 5 GHz, free channel (at home) | 13–14 MB/s | approx. 15 minutes |
| 5 GHz, busy channel (travelling) | 7.4 MB/s | approx. 29 minutes |
| 2.4 GHz (camera as access point) | 2–5 MB/s | approx. 45–105 minutes |
The minutes are extrapolated from the measurements, not timed. The 2.4 GHz row is a rough guide, not a measurement of my own.
The pitfalls: Err.1F, a hotspot without internet and more
From here on it gets technical. The FTP part was done quickly. Most of the work went into understanding and taming how Windows handles Wi-Fi.
| Problem | What is behind it | What the tool does |
|---|---|---|
| Camera shows Err.1F | If the internal Wi-Fi card is also connected to the hotel Wi-Fi, the hotspot has to share that network’s channel. The camera did not like that. | Disconnects the card from the other network and pauses auto-connect while it runs. |
| Hotspot won’t start | Windows only opens a hotspot when there is a connection to share. No internet, no hotspot. | Uses the USB stick for internet, or a Microsoft loopback adapter installed once as a stand-in. |
| Channel can’t be chosen | Windows only lets you pick the band (2.4, 5 or 6 GHz), not the channel. It also hides its own hotspot in scans. | The USB stick scans the surroundings and the dashboard shows channel usage. At least you can see when it gets crowded. |
| Port 21 in use | Old FTP servers and port ranges reserved by Windows. | Runs on port 2121, with passive ports between 40000 and 40100. |
| Laptop goes to sleep | Power saving kicks in mid-upload. | A dedicated thread keeps Windows awake. |
| Half-written photos | If the connection drops, a truncated NEF sits on the disk and looks like a real one. | Every file arrives as .part first. It only gets its real name once the file structure checks out, down to the embedded previews. |
Technically it is a single Python script with an FTP server and hotspot control via PowerShell. It is built into a single exe, in German and English depending on the Windows language, open source under the MIT licence.
Limits
The tool is young and so far tested with exactly one camera and one laptop.
- Tested only with the Z8 and only on Windows 10/11. Other Nikon models with FTP should work, but are untested.
- The laptop’s Wi-Fi card has to support a 5 GHz hotspot.
- Speed varies between 7 and 14 MB/s while travelling. My suspicion: hotspot and USB stick share a channel or channel width.
- The exe is not signed, so Windows SmartScreen warns on first start.
- The project has nothing to do with Nikon. “Nikon” is a trademark of its owner.
Download and setup
The camera setup is described step by step in the README, section “Camera setup (Z8)”. The dashboard shows the matching values as well.
How the camera gets into the water in the first place, and what happens to the photos afterwards, is covered in the article on underwater photography.
FAQ
Do I need internet for this?
No. Without a USB stick, you install the Microsoft loopback adapter once so that Windows starts the hotspot. The dashboard opens the right Windows wizard for it, and admin rights are required.
Does it work without an underwater housing?
Yes. But then you also have a cable and a card reader. It gets interesting when you can’t, or don’t want to, get to the card.
What if it doesn’t work for me?
The dashboard has a one-click diagnostic report. You can attach it to an issue on GitHub. Read it through first, because issues are public.