A thresher shark with its long tail fin gliding through deep blue water off Malapascua, Philippines

Journal / Underwater

Underwater Photography: From GoPro to a Full-Frame Camera in a Housing

Why every camera underwater is a compromise, what my setup looks like, how you get into the water with it and why the photos start out blue-grey.

13 Nov 2026

Why every camera underwater is a compromise, what my setup looks like, how you get into the water with it and why the photos start out blue-grey.

Contents · 8 sections

Underwater photography has one rule you can’t get around: the smaller the camera, the less it gets in the way while diving. And the smaller the camera, the smaller the sensor, as a rule. But the better pictures come from the big sensor. Every underwater camera is therefore a compromise between diving and photography.

I come from classic photography and take its standards with me underwater. I know pretty well what I want from a picture. As a diver, on the other hand, I am still gaining experience. So far I have tried three compromises.

Felix floating in open water off Soma Bay just below the surface, looking at the camera in its Ikelite housing
With the Z8 in its Ikelite housing in open water off Soma Bay, Egypt. Photo: Simon Schäfer – Fotos von RoSi

Three cameras, three compromises

GoPro

Very wide, very limited in editing, but it barely gets in the way. Jump in with the camera and off you go. I liked it best with a handle.

Definitely tie it to a leash, otherwise it is gone faster than you think. At least that is what my little sister tells me.

Olympus TG-6

A real upgrade over the GoPro: clearly better image quality at a similarly handy size, and really good at macro. But it is still a compact camera.

For most divers the TG-6 is probably the sweet spot. An all-rounder that hardly gets in the way and still takes decent pictures.

Nikon Z8 in an Ikelite housing

And then the option that is irrationally expensive and complicated, but still the best in terms of quality: packing a big camera. I use an Ikelite housing for my Z8, currently with the 14-24 mm behind a compact dome port.

What can I say: it brings the quality you are used to on land underwater.

Why underwater photos turn blue

Underwater, photos come out of the camera blue-grey at first. The water is to blame: it absorbs light, and not all colours equally. Red disappears first, then orange and yellow, green gets further, blue furthest.

What counts is the total distance the light travels through the water, not just the depth. Sunlight first has to get from the surface to the subject and then from the subject to the camera. At ten metres depth with three metres to the subject, that is already about 13 metres of water, and there is practically no red left.

How far each colour gets What counts is the total distance through water, not just depth.
How far each colour gets Guide values for clear water. Where a bar fades out, well over 90 % of that colour is gone. Murky water absorbs more. Red Orange Yellow Green Blue 051015202530 Light path through water in metres Strobe, 1 m away ≈ 2 m path Sun, 10 m deep, 3 m away ≈ 13 m path

Guide values for clear water. Where a bar fades out, well over 90 % of that colour is gone. Murky water absorbs more.

What the big sensor does with it

No camera can bring back what has been fully absorbed. But what is only faintly there can be pulled surprisingly far out of a full-frame raw file. The high dynamic range gives me the room in editing to bring the picture back to how I experienced the scene underwater.

Bringing your own light

If you take light down with you, a strobe or a torch, you partly get around the problem. Then the light only has to cover the distance to the subject and back, so about two metres at one metre away. The colours are simply there.

My setup doesn’t have that part yet. You shouldn’t flash or light up every animal, and it isn’t allowed everywhere. Above all, it takes a huge amount of power to light a large animal, and my setup is geared towards large subjects. So far I manage reasonably well without strobes, but the basis for an upgrade is there.

Particles: the snowstorm in front of the lens

The second big problem underwater is particles. Think of it as a snowstorm you have to shoot through. The closer you get to the subject, the less snowstorm there is in between and the better the picture. That is why so much underwater photography is done with wide angles: get close, and still fit everything in.

I am not fully convinced by the 14-24 mm yet, though. Most of the time I sit at 24 mm, so maybe it will be a 24-70 mm one day. With 24 mm you simply can’t get close enough to some animals. Or you don’t want to, so you don’t end up as the next fish food yourself.

It gets really tricky when you flash into the snowstorm. A strobe right at the camera mostly lights up the particles between lens and subject. That is why underwater strobes sit on long arms to the left and right of the camera, so the light hits the subject from the side. Only then the camera turns into a pretty big rig.

My setup in detail

The Nikon Z8 in its Ikelite housing with dome port and red handles on the deck of a dive boat at sunrise
My setup: the Z8 in its Ikelite housing with a compact dome port, here on the deck of the dive boat at sunrise.

The Ikelite housing has two handles. Normally there are ball mounts for strobe arms on top of the handles. On mine there is an adapter instead, which I designed myself and printed in carbon-fibre-reinforced PETG. It has been in use ever since. There is more about it in the article on the lanyard adapter, and the print file is on MakerWorld. Ikelite also offers its own solution for about 70 €.

I clip a coiled safety lanyard into the adapters: steel core, 170 cm long, stainless steel clips and a side-release buckle like the ones on backpacks. The other end is attached to my BCD. With the buckle closed, the camera hangs about 10 to 15 cm in front of me and my hands are free. Open it, and the coil gives as much slack as I need, while the camera stays attached to me. If it gets caught somewhere, I can unclip it from the BCD in an emergency and free myself. Safety first.

Before the dive I pump the housing down to a vacuum with a small pump. That pulls the seals together once more. Mostly, though, I can check the next day whether the vacuum has held, and that gives a good feeling. According to Ikelite, it is only a rough indication, roughly for the first ten metres. A single hair on the O-ring won’t show up this way. Then again, it probably only lets a little water in.

Practising before open water

Diving with a camera is different. The housing changes your position in the water, both hands are busy, and part of your attention shifts from diving to the picture. That needs learning, ideally where nothing can go wrong.

So I practise in the pool before the camera comes along to the sea. There is no current, no swell and no reef you could touch by accident. I practise what should later happen on the side: holding the camera, holding position, keeping buoyancy under control and finding the buttons on the housing. Without the housing I can operate the Z8 more or less blind, in the housing I still have to learn that. What sticks in the pool needs no thought in open water.

Taking the camera to the pool only works during a divers’ session, when the pool is reserved for divers. A camera has no place in regular swimming hours. The other guests rightly don’t want to end up in pictures, and I don’t want to bother anyone there either.

Felix diving with the Z8 in its Ikelite housing over the tiled floor of a pool, lane ropes in the background
Training during a divers' session at the pool. Photo: Simon Schäfer – Fotos von RoSi

How do you get into the water with that thing?

For anyone who doesn’t take photos underwater themselves, this is probably the most interesting question. The answer depends on how you get into the water.

From the beach. The easiest. You walk into the water and take the camera with you.

From a jetty. If the edge is high and you jump in one or two metres as a diver, you are better off jumping without the camera. You never know exactly how you will land, and whether something on the housing gets bent and then leaks underwater. It is better to have the camera handed down from the jetty. Often there is a rope with a carabiner for lowering it. In current, though, that is a gamble.

From a boat. From a Zodiac you can roll backwards into the water with the camera and hold it against your stomach. One hand on mask and regulator, the other on the camera. That works. With little current and swell, you can also have the camera handed down in a second step. But that is always a bit fiddly, and you risk getting hit by the boat’s hull. Which isn’t cool.

Getting out works the other way round: the camera goes on board first, on the rope or by hand, then the diver follows.

Why I went this big this early

To be honest, I bought the housing fairly early in my diving career. But I knew the investment was coming in the next few years anyway. So I would rather go straight for the system I can be happy with for a long time.

That is also why there is a camera in the housing that is current today. The hope: that it still delivers decent results in ten years and hasn’t died a saltwater death by then.

After the dive

First the camera goes into fresh water and gets a thorough rinse. Then the photos go to the laptop over Wi-Fi, without me opening the housing. I built my own tool for that, the whole story is in the article on FTP transfer from the Z8.

Then the work in Lightroom begins: first the selection, then masks and colour sliders to bring the picture step by step back to what I saw underwater. That usually includes retouching out particles that were in the water and disturb the picture.

Felix diving with the Z8 in its Ikelite housing just above sandy ground between corals
With the Z8 in its Ikelite housing close above the bottom. Photo: Simon Schäfer – Fotos von RoSi

Work in progress